All Colors ABS Filament 175mm 1kg22lb

Acrylonitrile Butadiene Styrene (ABS), is a tough and durable thermoplastic. It is one of the most popular and commonly used material on the market.

Widely used in health care, education, toys, building, automobile, electronics, and anime field

Weight: 1 KG (approximately 2.20 lbs) Spool

Material : ABS – Vacuumed Sealed with desiccant

Weight: 1 KG (approximately 2.20 lbs) Spool

Recommended extruder temperature: 230C – 260C

1x SainSmart ABS 3D printing filament

All Colors, ABS Filament 1.75mm 1kg/2.2lb

//cdn.shopify.com/s/files/1/1978/9859/products/ABS-web.jpg?v=1503310998

//cdn.shopify.com/s/files/1/1978/9859/products/ABS-web_medium.jpg?v=1503310998

Material : ABS – Vacuumed Sealed with desiccant

Weight: 1 KG (approximately 2.20 lbs) Spool

Recommended extruder temperature: 230C – 260C

1x SainSmart ABS 3D printing filament

All Colors, ABS Filament 1.75mm 1kg/2.2lb

//cdn.shopify.com/s/files/1/1978/9859/products/ABS-web.jpg?v=1503310998

//cdn.shopify.com/s/files/1/1978/9859/products/ABS-web_medium.jpg?v=1503310998

Material : ABS – Vacuumed Sealed with desiccant

Weight: 1 KG (approximately 2.20 lbs) Spool

Recommended extruder temperature: 230C – 260C

1x SainSmart ABS 3D printing filament

Posted on

FlashForge 175mm Creator Series ABS Filament

You have until Feb 1, 2018 to return or exchange items bought after Nov 1, 2017.

Enter new zip code to refresh estimated delivery time.

1.75mm Creator Series ABS Filament (2.2 lb, White)

1.75mm Creator Series ABS Filament (2.2 lb, White)

Enter new zip code to refresh estimated delivery time.

Place your order by 4pm tomorrow and your order will ship the same day. For further details see delivery estimates in cart. International orders are processed the next shipping day.

B&H only collects sales tax on orders shipped to addresses in the States of New York and New Jersey.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.

The white1.75mm Creator Series ABS Filament (2.2 lb)fromFlashforgeis made with 2.2 pounds of high quality 1.75mm ABS material to ensure smooth feeding and extrusion. All Flashforge filaments are tested to minimize the chance of jamming extruders. The ABS filament is compatible with all Flashforge 3D printers, such as the Creator Dual Extrusion and the Creator X Dual Extrusion.

or212.444.6615Live ChatCustomer Service

Thank you for joining the B&H email list!Thank you for joining the B&H email list!Sign UpThe email address you entered was an invalid email.

Speed up future orders, see order history, create wish lists, and more.Create a B&H Account

See sample NewsletterDeal Zone AlertsWeekly B&H NewsletterEnjoy the B&H mobile shopping experience

RecommendFollow© 2000-2018 B & H Foto & Electronics Corp. 420 9th Ave, New York, NY 10001

Privacy & SecuritysuzueszwbzztdwWe close every Friday evening to Saturday evening for Shabbos.Weekend hours

Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms NYC DCA Lic.: Elec. Store 0906712 Elec. & Home App. Serv. Deal. 0907905; Sec. Hd. Deal. Gen. 0907906

Posted on

175mm ABS

ABS (Acrylonitrile Butadiene Styrene) filament is a copolymer which is made of styrene, acryl and butadiene.

Suited for a wide range of 3D printers

All filament is delivered in a vacuum bag, with desiccant, wound onto a spool.

Heated build platform recommended (80 to 120 C).

Copyright © 2017 Verbatim Australia. All Rights Reserved.

Verbatim andlogo are the trademarks of Mitsubishi Chemical Media. registered in Australia and other countries.

Posted on

3DP Filament

High Precision 3D Pen/Printer Filament – Over 40 Colours – Worldwide Delivery

3DP Filament High Quality 1.75mm & 3.00mm ABS for 3D Printers. 1kg net spool:

Acrylonitrile butadiene styrene (ABS) is a common thermoplastic used in many applications. ABS is a strong, flexible and durable plastic available in a wide range of colours. ABS is the plastic which Lego is made from and is ideal for heated plastic extrusion 3D printing.

Small density – when printing larger volume models, it is lighter and saves money

Cost-effective – can be processed in wide range temperatures

Good human biocompatibility, avirulent and harmless

Available in diameters of 3.00mm/1.75mm. Variations + /-0.03mm,roundness +/-0.03mm

Good biodegradation, suitable for family compost degradation

Usable in a wide variety of 3D printers

1kg spool / vacuum packed polybag / box / bubble wrap

ABS 3D Printing Filament 1.75mm (1kg net Spools)

ABS 3D Printing Filament 1.75mm (5, 10 & 20 Metres)

ABS 3D Printing Filament 3.00mm (1kg net spools)

ABS 3D Printing Filament 3.00mm (5, 10, & 20 Metres)

Posted on

ABS-Filament

Filament for 3D Printers – 1kg ABS Plastic Reel

ABS 3D FILAMENT 1.75MM 1KG REEL – RED

Filament for 3D Printers – 1kg ABS Plastic Reel

ABS 3D FILAMENT 1.75MM 1KG REEL – GREEN

Filament for 3D Printers – 1kg ABS Plastic Reel

ABS 3D FILAMENT 1.75MM 1KG REEL – SILVER

Filament for 3D Printers – 1kg ABS Plastic Reel

ABS 3D FILAMENT 3MM 1KG REEL – WHITE

Filament for 3D Printers – 1kg ABS Plastic Reel

ABS 3D FILAMENT 3MM 1KG REEL – BLACK

Filament for 3D Printers – 1kg ABS Plastic Reel

Posted on

175mm and 3mm ABS 3D Printer Filament For 3D Printing Soft 3d Printer Filament

1.75mm 3d printer filamentcolor changing abs filament3mm abs plastic filament3mm abs filament supplier3d abs filament chinapla 3d printer filament1.75mm abs plastic filament3d printer cnc machine3d printer abs filament

1.75mm and 3mm ABS 3D Printer Filament For 3D Printing , Soft 3d Printer Filament

1.75mm and 3mm ABS 3D Printer Filament For 3D Printing , Soft 3d Printer Filament

1.75mm and 3mm ABS 3D Printer Filament For 3D Printing , Soft 3d Printer Filament

under 1000kg will be delivery within 7days

L/C, T/T, D/A, Western Union, MoneyGram,Paypal

XiangDing Industrial Zone, Xialang Village, Qishi Town,Dongguan City, Guangdong Province, 523120, China

Bulk quantity of ABS filaments 1.75mm and 3mm 3d printer filament for 3D printing* High strength,terrific toughness,stable in performance.has 37 kinds of color for choosewide range of processing temperature[ ABS].* When the temperature over 31 degree centigrade.the color will changed from one color to another colors.[color changed by temp ABS]* Color deverslty,eco-friendly.changes quickly[color changed by light]* conductive electricity,weakly electropositive elements,anti-static and electromagnetic shielding.(Conductive ABS)* ABS with about 15% carbon fiber make ABS more strong [ABS Carbon Fiber ]Normal ABS 3d printer filament :Application :Industrial model, mechanical parts,ect.

ABS Color Changed 3d printer filament :Application :Printing model color change under UV,ect,

Packing Details :* Spool+PE vacuum bag+desiccant+sticker+color box+carton box;* 8Rolls/CTN Size:43.5*43.5*16.5mm* 12Rolls/CTN Size:43.5*43.5*24.5mm* Desiccant bag will keep bag moisture-free,so the filament is safety during shipping .* Vacuum sealed bag can reduce moisture absorption with a resealable opening to store left over material.RFQ

Q1. How can we know the product quality?

A1: We suggest you to order a sample. Also we can offer CE SGS certification & MSDS ( Material Safety Date Sheet ),etc…

Q2. Is it the final price in the price list?

A2: You can find reference prices in the price list. According to your quantity and filament type, we will offer you the nice price.

Q3. When can we get reply after sending you the RFQ?

A3: Our working time is 8:30am. – 6:30pm. , Monday to Friday. Your RFQ will be replied immediately during working time, in 24hours during non-working time.

A4: Yes, some samples are free for customer, but you need to pay for the express fee. For details please send message to our sales service.

Q5. Can we get support if we have our own market position?

A5: Please inform us your detailed mind on your market demand, we will discuss and propose helpful suggestion for you, to find the best solution for you.

Q6. Is there cheap shipping cost to import to our country?

1.For small order,Take by express abount 5~7days will arrived your door. but the shipping cost is very expensive,2. If large order, take by sea shipping will be better.it will save a lot of your budget of your shipping .3. For urgent orders, we suggest via air to airport .around 5~15days will arrived your airport.

Q7. Can you offer OEM/printing logo on samples?

A7: Yes, but prices is different according to different logo styles such as letters, photo, size, colors and so on. For more detail please send message to our sales service.

A8: Yes. Due to too many visiting requirements, you need to make an appointment with our sales service. Customers who have placed an ordered will have priority.

1. Tell us which filament type,Quantitiy,color you want to order.2. Tell us your details address with zip code.( if by sea pls tell us your sea port )3. We will make PI(performa invoice) with shipping cost for your order to confirm.4. Checking the PI, we will delivery the goods to Shipper for you when we receive your payment.5. The shipping cost is depending on the weight.if take by sea depends on volume CBM ( cubic meters )

Dongguan YASIN 3D Technology Co,.Ltd.is a professional high-tech enterprise which is specializing in the research, development and production of 3D Printers,3d pen and 3D Printing Filaments.

YASINDeveloped all kinds of 3D Printing Filaments with rich colors,which is contributing to the colorful 3D world. Its 3D Filaments contains High Transparency ABS /PETG/ PC/ PMMA/ FSK Filaments, Full Bio-degradable TPU / ASA/TPE/TPV Flexible Filaments and PLA /HIPS/ PVA(Water Soluble) / Wood / PA (Nylon) / PA12/PETG /PC /Conductive ABS / Fireproof ABS//Soft PLA/Temperature Color Changing / Light Color Changing / Glow in Dark/ Copper Filled / Carbon Fiber/Iron Filled Filaments etc. Monthly output reaches more than 40 tons. All 3D Printing Filaments passed the CE, ROHS, SGS international quality and environmental certifications.

YASINown designed 3D printer machines fly its own colors.It focus on quality and stability,which makes all 3D lovers dream come true perfectly. Its main products are Desktop and large size industrial 3D printers. Focus, professional, focused! All products are certified by CE.

YASINadhere to continuous innovation as the core, and continue to enhance R & D investment for innovation power.

YASINhas a group of creative, thinking maverick young people who set their sights on the development of 3D printing industry, which based on the 3D printing industry trendsetters.

To the quality, service, integrity, win-win for the management of the enterprise;

To become the 3D industry leading enterprises as the ultimate goal .

For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ

Please enter 20 to 3000 characters to contact this supplier!

1.75mm and 3mm ABS 3D Printer Filament For 3D Printing , Soft 3d Printer Filament

Terms of useIPR Protection Privace PolicyPrivace Policy

Posted on

How To Succeed When Printing With ABS

How To Succeed When Printing With ABS

Last year, we published an article talking about how to succeed while printing with PLA. While we still love printing with PLA, we neglected to write about the sister filament – ABS. Prepare your printer and get a notepad – the time has come.

ABS is one of the most commonly used, and most versatile materials available in 3D printing today. If youre new to the scene though, it can be a bit daunting to start with. However, the payoff is worth it. Learning to print well with ABS is essential if you want strong, heat resistant parts.

ABS orAcrylonitrileButadieneStyrene is a common thermoplastic. Its a popular plastic for injection molding and its used to make legos, instruments, sports equipment and more.

If youre used to printing with PLA, youll probably find ABS a little trickier to print with. There are a couple more steps required for each print, and it has a different set of printing settings. However, you need not despair. ABS is a strong and heat resistant filament, with awesome post processing options. With this article under your belt, things will be printing your way.

As we discussed in our PLA article, getting the first layer down is the most important part of the print. Here are the key points:

You need the print bed (or print surface) to be level

You need the extruder to be homed to the correct height from the bed.

You need a good adhesive to assist your ABS in sticking to the bed.

And of course, making sure that your extruder is heated to the right temperature.

In order to print with ABS, you need a temperature controlled bed. The recommended bed temperature for ABS is 110C.

Instead of printing directly on the glass, its better to print withKapton/PET tape. This makes it easier to clean the bed after youve been printing for a while, as you can simply remove the tape, clearing any leftover adhesive or filament. For instructions on applying Kapton tape see the video below or read our article:Bed Surfaces – How to apply Kapton Tape

Having your bed level and extruder at the right height is extremely important when printing on tape. If your extruder is too far from the glass your ABS simply will not stick. If the extruder is too low the glass it will completely block the extrusion of material and may cause a jam after extended periods.

You should also make sure that you have an adhesive of some sort. ABS requires something to bind itself to during the first layer of the print. The most commonly used adhesives are glue sticks, ABS slurry, and hairspray. We prefer hairspray because its easy to apply and smells nice. Make sure you get the kind with a plastic base. (We have used Aqua Net Extra Super Hold)

If your first layer is not sticking:

Make sure that the ambient temperature of the print environment isnt too hot or cold (or else adjust accordingly).

Make sure you put the adhesive on the bed.

Make sure the print head is close enough to make a nice squished first layer.

Make sure you run the extruder enough before your print starts so there is filament going onto the bed during the entire first layer. In MatterControl you can set how much material you would like to extrude before the print starts, either with loops, or if your an expert GCode commands.

Kapton/PET tape is a great way to print ABS. It makes a great shiny bottom layer and the heated bed ensures that your parts stay nice and flat.

For more in depth information regarding ABS bed adhesioncheck out this article we wrote for more detailed guidance.

When working with a new roll of filament for the first time, we generally like to start out printing at about 230c and then adjusting the temperature up or down by 5 degree increments until we get the quality of the print and the strength of the part to be in good balance with each other.

You will see more strings between the separate parts of your print and you may notice that the extruder leaks out a lot of plastic while moving between separate areas of the print. If this happens you should try to incrementally lower the temperature by 5 degrees until the extruder is not leaking so much material.

Sometimes you will have a material that is simply less viscous than ABS and will leak more even at lower temperatures. We recommend you increase the retraction a few millimeters (3-4 seems like a good number for most every ABS we have tried).

You will either see that the filament is not sticking to the previous layer and you are getting a rough surface, or you will get a part that is not strong and can be pulled apart easily. In either case, you should increase the temperature by 5 degrees and try again until you get good line segments on every layer and have a strong part when done printing.

A print gone cold. Check your retraction and heat for clean prints.

While the extruder is cold set the heat to 120c and wait for it to heat up.

When you reach 120c remove the current filament from the extruder. You may be able to back it out by hand or you may need to reverse the extruder.

If you are having trouble removing the filament, increase the temperature to 180c and try again.

Clean the extruder gear and blow out any particles from the extruder entrance.

Increase the heat and load the new filament normally.

Run the new color through the extruder until it runs clean and the new color is all that is coming out of the extruder. If you are switching from a dark color (such as black) to a light color (like white or natural) you may want to extrude for a few minutes to be you sure dont have any dark contamination.

Print something that you dont care if it has bits of the previous color in it, or run the extruder for several minutes. It may take as much as 10 to 15 minutes of extrusion before you can have confidence that there wont be dark material mixed with lighter material.

Note: We recommended removing the filament when soft rather than when fully melted so that there is a lower possibility of depositing melted material onto the extruder drive gear or leaving meterial high up the melt chamber entrance. Both of which can cause jamming and are hard to clean out. Soft removal also helps ensure that you get everything out of the extruder tip.

There are a few key things to check when your prints arent working. But before we look at solutions we need to have a brief description of your symptoms.

I cant get the first layer to stick.

Make sure the extruder is at the right height. Adjust the limit switch or extruder to 0 height

Make sure the print bed is level. Level the bed.

Make sure youre printing at the right temperature and that your bed is the right temperature.

Check the ambient temperature of your environment. If its too cold or too hot outside, your print can vary drastically!

The part has bad internal layers and top surfaces.

Check the extrusion temperature (you may need to increase it by 5 degree bumps).

Make sure your part is properly cooled.

The outside edges of my parts have lots of little bumps on them.

Make sure your printer is getting enough data. If printing from a computer, ensure that the computer is not too busy to feed the printer commands. If the printer is pausing it is usually due to the printer being too busy.

Print from the SD card. On some printers you can try and print from the SD card. This often helps the printer have enough data to run more smoothly.

However, dont be too quick to assume the problem is in your ABS. With the right settings and patience hobbyists have succeeded in printing all sorts of materials many of which have very low viscosity. You should be able to get usable parts even with some lower quality filament.

Tall sections of my prints look melted or squished together.

Turn on Cooling. If your printer has a fan you should enable Cooling in the print settings.

Get a small fan. If your printer does not have an integrated fan you should look into getting a small desk fan. This can help dramatically with tall sections of your print or when bridging (printing top layers that span gaps).

Make sure that you have a good amount of adhesive on the bed and that youre applying a fresh layer with every print. In addition, turn on a brim. Having a brim that extends out a bit helps give the part a large base to work with, as well as having more to adhere to.

My printer will not extrude any material.

Make sure your hot end is getting hot. Check to make sure the hot end is heating at all. If it is not, you need to have your printer serviced. It is likely that you have a loose connection, or your electronics have been fried (assuming the printer is still connected and responding to your host software).

Clean the drive gear and adjust tension. The first thing we are going to do is clean the filament touching drive gear and ensure that we have proper tension against the filament. Usually improper tension or a clogged drive gear will make the print look more like the picture we have for low temperature filament, but it sometimes does prevent extrusion all together. Clean the pinch wheel with a wire brush, and make sure your tension is good and solid (too much can also prevent extrusion and is more common with direct drives [the motor is directly connected to the drive gear] but less common with geared drives).

Remove the current filament. It may be that you have a small particle in your extruder tip jamming the plastic. Use the change filament technique described above to pull out any particles that are in the extruder tip.

Check for and remove jams between the extruder and hot end. This is the most extreme type of problem because now its time to take things apart. Sometimes heat can creep up the filament in the extruder and cause a bulge that then cools and prevents any further extrusion. This is usually at the junction between the extruder and hot end. Take off the extruder and remove all the ABS you can (you may need the hot end hot to get all the material out.) If you cant get out all the filament by pulling, you may need to try and drive it down through the hot end. We usually use a small allen wrench. If this fails you can try and drill out the extruder or hot end but you may need to replace parts. Be sure to take precautions against being shocked or burned. If you are not qualified to do this work, find someone who is, rather than risk injury.

If you have any comments, corrections, or contributions, please drop us an email or give us a call. We are always looking for tips, and best practices – and would love to hear from you.

Posted on

GP3D Premium ABS Filament

This button opens a dialog that displays additional images for this product with the option to zoom in or out.

1.75mm diameter filament for use with FFF (Fused Filament Fabrication)

Ideal extrusion temperatures range from 230-240 degrees Celsius

1.75mm diameter filament for use with FFF (Fused Filament Fabrication)

Ideal extrusion temperatures range from 230-240 degrees Celsius

Get specific details about this product from customers who own it.

Bought this filament as a tester as I set up the heated bed for my printer, and the appeal of having it shipped to store and picking up in a few days was the decider, I was surprised at how strong and consistent my prints were with this particular filament and have had zero issues with clogging or filament related failures, I am about half way through this roll. good price, fast pick up, great quality

See any care plans, options and policies that may be associated with this product.

Electrode, Comp-283796823, DC-prod-dfw5, ENV-prod-a, PROF-PROD, VER-21.5.0-rc-6, SHA-c1a349a4dc42b4076b569a3b765930a234811f5b, CID-

Posted on

3Doodler® ABS Filament Hipster Hue Mix Refill

BOGO 50% off All Staedtler Colored Pencil & marker Sets

50% Off Red Label Strung BeadsShop Now

3 for $10 Gildan Adult & Youth T-ShirtsShop Now

30% Off Spring Floral, Wreaths, Garlands & AccentsShop Now

60% Off Belmont Frames & Shadow BoxesShop Now

50% Off 2018 Planners by Recollections & The Happy PlannerShop Now

Shop Wedding Dcor, Favors & AccessoriesShop Now

30% Off Spring Floral, Wreaths, Garlands & AccentsShop Now

3Doodler® ABS Filament Hipster Hue Mix Refill

3Doodler® ABS Filament Hipster Hue Mix Refill

3Doodler® ABS Filament Hipster Hue Mix Refill

The ABS Hipster Hue pack contains a mix of filament colors that are perfect for creating bright and bold 3Doodles. Featuring an assortment of colors that the cool kids love, these filaments can be used to create colorful creatures and bright accessories in your favorite trendy colors. 3Doodle upwards, make things that are strong yet bendable, and create easy to peel stencils with maximum versatility with this ABS plastic. Use them solo or in the same doodle!

For use with the 3Doodler 2.0 and 3Doodler v.1

5 strands of Sunnyside Yellow (10 each)

5 strands of Riding Hood Red (10 each)

5 strands of Totally Teal (10 each)

The ABS Hipster Hue pack contains a mix of filament colors that are perfect for creating bright and bold 3Doodles. Featuring an assortment of colors that the cool kids love, these filaments can be used to create colorful creatures and bright accessories in your favorite trendy colors. 3Doodle upwards, make things that are strong yet bendable, and create easy to peel stencils with maximum versatility with this ABS plastic. Use them solo or in the same doodle!

For use with the 3Doodler 2.0 and 3Doodler v.1

5 strands of Sunnyside Yellow (10 each)

5 strands of Riding Hood Red (10 each)

5 strands of Totally Teal (10 each)

The ABS Hipster Hue pack contains a mix of filament colors that are perfect for creating bright and bold 3Doodles. Featuring an assortment of colors that the cool kids love, these filaments can be used to create colorful creatures and bright accessories in your favorite trendy colors. 3Doodle upwards, make things that are strong yet bendable, and create easy to peel stencils with maximum versatility with this ABS plastic. Use them solo or in the same doodle!

For use with the 3Doodler 2.0 and 3Doodler v.1

5 strands of Sunnyside Yellow (10 each)

5 strands of Riding Hood Red (10 each)

5 strands of Totally Teal (10 each)

The ABS Hipster Hue pack contains a mix of filament colors that are perfect for creating bright and bold 3Doodles. Featuring an assortment of colors that the cool kids love, these filaments can be used to create colorful creatures and bright accessories in your favorite trendy colors. 3Doodle upwards, make things that are strong yet bendable, and create easy to peel stencils with maximum versatility with this ABS plastic. Use them solo or in the same doodle!

For use with the 3Doodler 2.0 and 3Doodler v.1

5 strands of Sunnyside Yellow (10 each)

5 strands of Riding Hood Red (10 each)

5 strands of Totally Teal (10 each)

Most products may be shipped via standard ground (delivered in 5-7 business days), second day or next day. Orders placed by noon (12:00 PM) Central Time using second day or next day will ship the same day. We also offer a ship-to-store option that allows your order to be delivered to any of our Michaels store locations.View Full Shipping Policy and Pricing

If your Michaels.com purchase does not meet your satisfaction, you may return it within six months (180 days) of purchase. To return an item (excluding sample products), the item must be new, unused and in its original packaging. You may return the item to a Michaels store or by mail.View Full Return Policy

Posted on

Wanted Abs And Pla Filament

Please click here to check whos online and chat with them.

We want to import ABS and PLA filament 1.75mm with the following specifications :

Quality : SGS, CE, Grade A,100% virgin material

Dimension : 1.75mm & 3.0mm & 2.85mm,

Material : PLA, ABS, HIPS, PVA, PC, PA/nylon, PET, PETG, TPE, Flexible, wood

Color : Over 32 kinds color, Custom color

Destination Port : Guangdong, China

Looking for suppliers from : Worldwide

GOLD Premium members can contact unlimited buyers and SILVER Premium members can contact 50 buyers per week and get access to complete contact details while sending inquiry to buyers.Click Here to Login.

Not a Premium member? No problem. You can still contact limited number of buyers absolutely FREE.

Please enter the following text in the box below:

More Items Similiar to: Wanted : Abs And Pla Filament

We would like to contact those suppliers or exporters who can provide me ABS pla filament with more given details and terms : – Diameter 1.75mm – Want different color Quantity required : 20 Ft Container Destination Port : Port of Shenzhen Shipping Terms : FOB Payment Terms : T/T Looking for suppliers from : Worldwide Regards Contact : Tati***********

VERIFIEDDec-07-15Wanted : Abs Pla 3D Printer Pen FilamentBuyer From United States

We are looking to find reliable suppliers who can supply to us ABS PLA 3D Printer pen filament with consistent quality on a regular basis. Product Specifications : ABS PLA 3D printer pen filament Perfect package ABS PLA 3D printer pen filament 3D printer pen filament Material : ABS 1.75 MM Variety of colors packaged into one bag Quantity Required : 30 sets as as a sample to check Shipping Terms : FOB Destination Port : USA Payment Terms : T/T Looking for Supplier from : Worldwide Regards Contact : Susa***********

VERIFIEDJul-27-15Wanted : 3Mm Pla Abs 3D Printing FilamentBuyer From South Korea (Republic Of Korea)

We are looking for customized high quality 1kg/spool 1.75mm 3mm PLA ABS 3D printing filament with the following specifications: Plastic Modling Type : Extruding Spool size : 20*20*9cm Material : ABS PLA Net weight : 1 kg Diameter : 1.75mm 3.0mm Color : grey Quantity Required : 2 – 20FCL Shipping Terms : CIF Payment Terms : T/T Destination Port : Incheon, Korea Looking for suppliers from : Worldwide Regards Contact : Young******

VERIFIEDMay-14-15Wanted : 3D Printer Filament And Pla Abs Hips FilamentBuyer From United Kingdom

We have a buy requirement of 3D printer filament and PLA ABS HIPS filament in plastic rods. Shipping Terms : CIF or FOB Destination Port : Oxfordshire, United Kingdom Payment Terms : Negotiable Looking for Suppliers from : Europe Regards Contact : Moham*********

VERIFIEDSep-01-17Wanted : 3D Printing Abs FilamentBuyer From Portugal

Please quote for the following wholesale product requirement – Product Name : 3D Printing ABS Filament Specifications : 42 Cores 3d printing ABS Filament Quantity Required : 100-200 meters Shipping Terms : FOB Destination Port : Portugal Payment Terms : L/C Looking for suppliers from : Worldwide Contact : Frederico Oliveira

VERIFIEDMay-16-16Wanted : Pla FilamentBuyer From Turkey

We are interested in importing PLA filament with the details given below : Size : 1.75mm Quantity Required : 10 MT Shipping Terms : CIF Destination Port : Mersin, Turkey Payment Terms : L/C Looking for suppliers from : Worldwide Regards Contact : Tahs*************

VERIFIEDDec-02-15Wanted : Pla FilamentBuyer From United Kingdom

We would like to import PLA filament with the details given below : Diameter : 3mm Colour : Black Weight : 5kg Quantity Required : 50 rolls Shipping Terms : FOB Destination Port : UK Port Payment Terms : T/T Looking for suppliers from : Worldwide Regards Contact : Jam********

VERIFIEDJul-29-15Wanted : Pla FilamentBuyer From Australia

We are interested in importing PLA filament (1.75, PLA/HIPS/PETG/PVA) with the following details : Quantity Required : 100-500 spools Shipping Terms : CIF Destination Port : Melbourne Australia Payment Terms : By Paypal Packaging Terms : OEM Packing Looking for Suppliers from : Worldwide Regards Contact : C****

VERIFIEDJul-02-15Wanted : Pla Filament Extrusion LineBuyer From Iran

We are looking for suppliers from China who can get us with following mentioned product with minimum order quantity. Product Specification : PLA filament extrusion line with having capacity like 100, 200 and 300 Kg/hr. Shipping Terms : CIF Destination Port : Bandar Abbas, Iran Payment Terms : T/T Looking for Suppliers from : China Regards Contact : Mohamm**********

Posted on